Automatic Filter Cloth Washing Filter Press Factory
|Min. Order:||1 Set/Sets|
|Packaging:||suitable for ocean transport|
Automatic Filter Cloth Washing Filter Press Factory
Introduction of Filter Press:
A filter press is a batch operation, fixed volume piece of equipment ranging from 0.1m3 -20m3 that separates liquids and solids using pressure filtration. Slurry is pumped into the filter press and dewatered under pressure. A filter press can be used for solid-liquid separation or wastewater treatment in a variety of different industries and applications, such as mining, metallurgy, petrol, chemical, medical, dyeing, paper, food, alcohol, textile production, etc..
Main components of filter press:
> Frame: The steel frame acts as a clamping device for the filter plates.
> Filter Plates: A filter cake forms in the chambers between filter plates.
> Filter Cloth: A cloth filter that is attached to both sides of a filter plate. Solids build up on cloth to form a filter cake, separating liquids from solids.
Types of Filter Press according to:
> Closing mode: manual, gear drive, hydraulic;
> Filtrate flow: open flow, close flow, cake washing, non-cake washing, center feeding, corner feeding,etc..
> Filter plate structure: recessed plate, plate &frame, diaphragm squeeze (membrane) plate;
> Filter plate material: PP, rubber, cast iron, stainless steel;
> Filter Plate size: 320, 450, 630, 800,1000, 1250, 1500, 2000
Working principle of Chamber Filter Press:
- 1. Slurry is pumped into the filter press. The solids are distributed evenly on the filter cloths during the feed (fill) cycle.
- 2. Solids begin to build on the filter cloth, trapping the ensuing particles and building a filter cake. The filter cake acts as a depth filter for solid/liquid separation. Filtrate exits the plates through the corner ports into the manifold.
- 3. When the correct valves in the manifold are open, the filtrate exits the press through the filtrate outlet. As the filter press feed pump builds pressure, the solids build within the chambers until they are completely full of filter cake.
- 4. Once the chambers are full, the fill cycle is complete and the filter press is ready to be emptied.
1) The plate-frame sludge filter press is an intermittent solid-liquid separation device.
2) It consists of a filter plate and a filter frame arranged to form a filter room. Under the pressure of the feed pump, the feed liquid is sent to each filter room through filtration.
3) Medium, separating solids from liquids. It has the advantages of good separation effect, wide application scope, simple operation, and low investment.
4) Especially for the separation of viscous material, it has unparalleled superiority
Shenzhen HONGFA ENVIRONMENTAL PROTECTION EQUIPMENT CO.,Ltd has become one of the world's leading manufacturers of high-quality filter presses in the field of solid-liquid separation
It is a professional one-stop company covers develop,design,produce,sale and after-service,the company has a professional R&D team, and draws on the advance technology of the world on the products and innovates constantly Company also has environment protection equipment manufacturing factory and filter press accessories manufacturing factory.
PACKING AND DELIVERY
Our Engineering Project
Advantages of Shenzhen HONGFA Filter Press:
1. Low filter cake moisture;
2. Unmanned operation and cost saving;
3. Resist high temperature and corrosion;
4. Good sealing effect can perfectly avoid leskage;
5. Energy saving high performance chamber filter press with long working life
Shenzhen Hongfa Environmental Protection Equipment CO., LTD
We are a manufacturer of Filter Press industry for over 10yrs experince.we provides wastewater treatment plants for a variety of industries and applications; industrial wastewater reclamation; industrial wastewater reclamation systems; industrial water recycling systems Shenzhen Hongfa is a leading supplier of industrial and commercial wastewater treatment equipment. Headquartered in Shenzhen,China, we are dedicated to meeting the Water Treatment needs of companies worldwide. We offer custom wastewater treatment equipment as well as parts and services. No matter the size of your dewatering project, Shenzhen Hongfa has solutions to help your company optimize the reuse of this natural resource.
- Company Name: Shenzhen Hongfa Environmental Protection Equipment CO., LTD
- Representative: Miss WU
- Product/Service: Filter Press , Plate and Frame Filter Press , Chamber Filter Press , Membrane Filter Press , Wastewater Treatment , filter press pump
- Capital (Million US $): 10,000,000RMB
- Year Established: 2012
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 31% - 40%
- Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: NO.3 Aoxiang Road, Zhangbei Second Village, Ailian, Longgang District, Shenzhen, 518172, China
- Contact Person: Ms. Serena
- Tel: +86-755-13538033101
Premium Related Products